Anti-mould and anti-condensation paint for cold and badly insulated surfaces.
Yield
– 0.50 L/m² = 81.49 ft²/gal
Packaging
– 5 L (1.32 gal U.S.) plastic bucket.
– 14 L (3.70 gal U.S.) plastic bucket.
– 14 L (3.70 gal U.S.) plastic bucket.
Drying time
– 6h
Value referred to +23°C/+73°F and 50% relative humidity
Value referred to +23°C/+73°F and 50% relative humidity
Application
– Airless
– Brush
– Roll
– Brush
– Roll
Characteristics
White coating for indoor application, based on latex and special mineral powders, whose insulating characteristics are able to keep the coated surfaces warm, thus eliminating thermal bridges. Between a surface treated with C.W.C. – Stop Condense and one with a normal paint, there are well + 5 ° C of difference. These extra degrees of heat prevent the air from condensing on the wall, even when there is a high relative humidity in the room (up to 90%), thus eliminating the formation of mould and condensation.
Aspect: liquid
Components: One-component
Breathability: µ = 8
Overpainting allowed
The thermal and ecological solution
for the health and well-being of indoor environments.
- Do-it-yourself
- Quick and easy to apply
- Economic solution
- Hygienic rehabilitation of inhabited environments
- It can be painted over with water-based paint
- Final physical resolution (neither chemical nor toxic)
- Solvent-free product.
Prodotti linea Finishes
Colored products to finish but at the same time protect and preserve the structures.
SCOPRI TUTTI I PRODOTTI