Yield
according to consumption
See technical data sheet.
See technical data sheet.
Packaging
600 cc cartridge
Drying time
- 2h
Value referred to a temperature of +23 °C (+73 °F) and relative humidity level of 50% for each mm of thickness.
Value referred to a temperature of +23 °C (+73 °F) and relative humidity level of 50% for each mm of thickness.
Application
- Spatula
- Extrusion
- Extrusion
Characteristics
One component polyurethane sealant, to waterproof and seal dilatation joints, iron bars, junction between prefabricated panels and all difficult points in general.
It is characterized by its high elasticity and filling capacity. To be applied manually by spatula or by extrusion gun.
Aspect: Paste
Components: One-component
Elongation > 900 %
Adhesion to concrete > 2,0 N/mm2
Working temperature: from -40°C to + 80°C
Thermal resistance: no changes after 100 days at 80°C
Chemical resistance: no elasticity changes after dipping into hydrochloric acid
Ageing resistance (Weathering Test): 2000 hour without remarkable changes
High filling capacity
to waterproof joints, iron bars and difficult points in general
- Easy to use
- It follows the movements of the support
- Ageing resistant
- High resistance to heat (>60°C)
- Elastic even at -40°C
- Excellent resistance to micro-organism and to contact with chemical products
- Suitable to seal joints on swimming pools
- Suitable if in contact with drinkable water
- Ageing resistance
Prodotti linea Paste Waterproofing
Products for waterproofing, protecting and preserving any type of structure from water infiltration in both positive and negative hydrostatic pressure.
SCOPRI TUTTI I PRODOTTI