Yeld
– 0.50 L/m²
Value referred if applied over medium absorbent support.
– If used over low absorbent support the coverage is 0,30 L/m².
– If used over high absorbent support the coverage is 0,70 L/m².
Value referred if applied over medium absorbent support.
– If used over low absorbent support the coverage is 0,30 L/m².
– If used over high absorbent support the coverage is 0,70 L/m².
Packaging
– Bucket
Drying time
– 4h
Value referred to a temperature of +23 °C (+73 °F) and relative humidity level of 50% for each mm of thickness.
Value referred to a temperature of +23 °C (+73 °F) and relative humidity level of 50% for each mm of thickness.
Application
– Brush
– Airless
– Roll
– Airless
– Roll
Characteristics
BKK Eco is a colourless water repellent coating that can be applied to exterior walls. It prevents water absorption due to wind driven rain, is breathable and lets moisture dry out ensuring the wall’s insulation performs at its highest level. BKK Eco prevents algae growing and helps reduce the risk of salt deposits forming. If water is not absorbed, it can’t freeze and degrade the wall surface. By keeping the wall dry for longer, this in turn increases the thermal performance of the wall. Compared to traditional solvent based solutions, BKK eco is a completely water based product, not dangerous for environment and health, both during application and curing.
Where to use it
Diasen BKK Eco can be used on exposed stone, masonry walls and plasters from water absorption due to wind driven rain. It has no visible effect on the wall so is an ideal protective coat for solid stone or masonry walls that are insulated internally with Diathonite Thermal Plaster.
It may also be used internally to protect Diathonite plastered walls when the bare plaster is not finished with Argacem HP and Decork (for example when the plastered wall will have timber paneling installed over the top). It may also be applied over Argacem HP where the homeowner does not wish to paint the finish plaster.
Please note, natural variations in the consistency of the finish plaster will then be exposed. To attain the most consistent finish it is recommended to paint with a breathable finish such as breathable natural paints.
Aspect: Liquid
Components: One-component
Breathability: μ=7
Weathering test resistance: 1680 hours without remarkable changes
UV rays resistance: 680 hours without remarkable changes
Colourless water repellent coating,
water based, natural and ecological, suitable to protect
- 100% water based: ecological, natural, not dangerous for health
- Do-it-yourself
- Long lasting water repellency
- Permeable to water vapour
- It does not alter the colour of the masonry
- It improves the thermal performance of the wall over which it is applied because it protects the wall from water absorption and humidity
- It avoids efflorescences and moulds on masonry