Yield
– 14.00 ± 20% kg/m² // 2.86 ± 20% lb/ft² per 1 cm of thickness. Value referred to the application of continuous layer.
Packaging
– 25 kg paper bag
Drying time
– 1h
Value referred to +23°C/+73°F and 50% relative humidity
Value referred to +23°C/+73°F and 50% relative humidity
Application
– Trowel
Characteristics
Thermal-insulating cement-based bedding mortar with low specific weight, formulated with lightweight mineral aggregates and selected grain size sand. Ideal for seismic areas.
The product is designed for the installation of masonry blocks. It is characterized by low thermal dispersion coefficient. Therefore, it is ideal for building up masonry by using several types of thermal blocks, hence optimizing the total final yield, drastically limiting the heat loss and thermal bridges generated by common bedding mortars.
Aspect: powder
Components: One-component
Thermal conductivity (λ) 0.244 W/mK
Bulk Density (powder) 970 ± 30% kg/m3 // 60.6 ± 30% lb/ft3
Reaction to fire class A1
Water absorption: 0.5 kg/m2min0.5
Compressive strength
> 10.0 N/mm²
> 1450.4 lbf/in2 (psi)
Effective and safe solutions
for the bedding of all bricks types, in seismic and non-seismic areas.
- High thermal coefficient
- Excellent workability
- Energy saving due to the improvement of the thermal insulation of the masonry
- Compression resistance in category M10
- Resists weathering agents.
- Product with CE EN 998-2 and UKCA BS EN 998-2 certification