Watstop is used to stop rising damp and water infiltration by creating a damp-proof membrane wherever it is applied. On vulnerable walls above and below ground level, Watstop creates a damp-proof tanking layer to stop water penetration and prevent salt deposits.
Yield
- 1 kg/m2, value as vapour barrier - 62.34 ft²/gal.
- Applied as waterproofing in counterthrust the yield is 2 kg/m² - 31.17 ft²/gal.
- Applied as waterproofing in counterthrust the yield is 2 kg/m² - 31.17 ft²/gal.
Packaging
5 or 10 kg plastic bucket
Drying time
24 hours, value related to a temperature of 23°C and 50 % relative humidity.
Application
- Brush
- Roll
- Spatula
- Roll
- Spatula
Features
WATstop is a three-part epoxy resin which is comprised of an epoxy mortar, catalyst and cement compound. Once mixed, it remains workable for two hours so we recommend you only mix up as much material as you need. Its application precedes the coating with plasters, smoothing compounds, tiles or acrylic resin.
Where to use it
Diasen Watstop tanking plaster can be applied directly to any kind of wet or dry surface both internally and externally to make it waterproof. It is suitable for use in new-builds and refurbishment (retrofit) projects where the infiltration of rising damp or moisture from walls that are in contact with the ground needs to be controlled.
Do you want to find out more?
Aspect: Paste
Components: Three-component
Waterproofing with positive pressure: 9,5 atm.
Waterproofing with negative pressure: 9,5 atm.
Adhesion on concrete surface: 2,5 N/mm2 (good).
Adhesion on tuff: 3,0 N/mm2 (good).
Adhesion on chipping floor: 1,5 N/mm2 (good).
Adhesion on expanded polyurethane pannel: 1,25 N/mm2 (good).
Adhesion on expanded polystyrene (EPS): 1,5 N/mm2 (good).
Adhesion on glazed ceramic tile: 2,5 N/mm2 (goood).
Colour: Black and White.
Benefits
Why should you choose WATstop
- Resistant up to 9.5 ATM of negative pressure (counterthrust).
- Applied internally, it avoids demolitions and excavations outside.
- Together with Deumix +, WATstop acts as a barrier to water and / or steam on walls against the ground.
- Encapsulates salts from the soil.
- Excellent waterproofing, consolidating and filling properties.
- Multipurpose.
- Can be applied directly on concrete substrates.
- Prevents the removal and disposal of the old plaster.
- It can be covered with plaster, smoothing compound and transpiring finish.
- If applied to the floor, the product can be tileable.
Do you want to find out more?
Prodotti linea Liquid Waterproofing
Products for waterproofing, protecting and preserving any type of structure from water infiltration in both positive and negative hydrostatic pressure.
SCOPRI TUTTI I PRODOTTI